Specifications:
Brand: Gokwh
Name: Energy Storage Box
Cell Type: LiFePO4(LFP)
Model: 12V200AH(2560WH) with BT +SOC mini
Dimensions: L345* W190 * H245 mm
Terminal Type: M8
Approx Weight: 19kg
Nominal Voltage: 12.8V
Cut-off Voltage: u226510V
Recommend Charge Voltage: u226414.6V
Recommend Charge Voltage: u2264100A
Recomend Discharge Current: u2264200A
BMS Bulit-in: 200A BMS
Protection: IP65, Built-in BMS
Internal Resistance: u226430 mu03a9
Cycle Life: u22654000 Cycles
Service Life: 10 years
Warranty: 5 Years
Temperature Range:
Charge: 0~45u00b0C (32~113u00b0F)
Discharge: -20~60u00b0C (-4~140u00b0F)
Storage: -10~45u00b0C (14~113u00b0F)
Parallel Connection: Up to 4P 12.8V 800Ah 10.24kWh
Series Connection: Up to 4S 51.2V 200Ah 10.24kWh


Features:
- Advanced LiFePO4 Technology: Utilizing LiFePO4 cells, this battery offers enhanced safety and long life cycle compared to traditional lithium-ion batteries, providing over 4000 cycles and ensuring reliable power for at least a decade.

- Built-in Bluetooth & SOC Mini: The integrated Bluetooth function allows for real-time monitoring through a dedicated app or the LCD display. SOC Mini provides precise state-of-charge information, ensuring effective management and optimal performance.

- Superior Battery Management System (BMS): The 200A integrated BMS offers comprehensive protection against overcharge, overdischarge, and short circuits. It includes automatic balancing of cells and overtemperature protection for both charging and discharging.

- Weather-resistant Design: With an IP65 rating, this battery is designed to withstand challenging conditions, making it ideal for both indoor and outdoor applications. Its robust construction ensures protection against dust and water jets.

- High Performance and Versatility: It supports parallel and series connections, allowing for scalable energy answers up to 51.2V 200Ah. Its high recommend discharge current up to 200A ensures it can support high-power devices seamlessly.

Package Included:
1 x Energy Storage Box (12V 200Ah 2560Wh)
1 x User Manual
2 x M8 Terminal Bolts

Battery Connection:
Safe and reliable installation requires trained and certified technicians. Therefore, the purpose of this section is only to serve as a guideline as all scenarios cannot be covered.
Preparationuff1a
Before the installation and operation of the battery, it is recommended to have the following
equipment or tools available:
Inspection:
Please check for visible damage including cracks, dents, deformation, and other visible abnormalities. The top of the battery and terminal connections should be clean, free of dirt and corrosion,and dry. If any problems are detected with the battery, please contact us for assistance. Refer to thelast page of the manual for contact information.
Cable Sizing:
Battery cables (sold separately) should be appropriately sized to handle the expected load.
Please refer to the following table for the ampacities of copper cables with different gauge sizes.

WARNINGS
. DO NOT immerse the battery in water or allow it to get wet.
. DO NOT use or store the battery near sources of heat such as a fire or heater.
. DO NOT reverse the positive (+) and negative (-) terminals.
. DO NOT connect the battery directly to wall outlets or car power socket with lighter function without proper charging equipment. DO NOT allow exposed ends of cables connected to opposite terminals to touch.
. DO NOT put the battery into a fire or apply direct heat.
. DO NOT use the battery if the battery casing has been pierced, broken, cracked,or otherwise visibly damaged. DO NOT forcibly open the battery casing for any reason.
. Avoid severe physical shock. Do not throw the battery or heavily hit the battery in any way. Do not put excessive pressure or step on the battery.
. Never solder anything directly to the battery terminals.
. DO NOT attempt to disassemble or modify the battery in any way.
. DO NOT place the battery in a microwave oven or pressurized container